0.315" 2.25xD Depth Indexable Turning Facing Drilling Coolant Thru Drill
SKU
404-1452
Out of Stock
Shipping UPS Ground
Details
| Mfg SKU # | 404-1452 |
|---|---|
| drill size | 0.315 |
| shank size | 3/8 |
| Max Drill Depth | 0.709 |
| Drill Depth by Diameter Ratio | 2.25xD |
| L1 | 0.866 |
| Insert Style | XPNT |
| Insert Size | 040204 |
| Coolant Through | Yes |
| Brand | Shars Tool |
| finish coating | black oxide |
Badges
Alloy Steel
Heat Resistant Steel
Stainless SteelSpotlight
 |
 |
 |
 |
| Drilling with Flat Bottom | Turning of internal profiles | Facing operation | Turning of external profiles |
- A single tool capapble of drilling, internal boring, external facing, and external turning
- Drilling application including drilling from flat bottom
- 3 coolant ports to flush away chips in different directions
- Save tool carriage capacity and lower the installation time from 4 cutting tools to 1
- Lower the frequency in setting 0 on the cutting tool and simplify programming process
- Comparing to 4 cutting tools, it minimize the cost of insert inventory and upfront cost
- Insert avaliable in various grade and coating to meet the material and cutting process requirement
| Workpiece Material | Hardness (HRC) | Vc (ft/min) | Turning of Internal Profiles | Facing Operations | Drilling | |||
| Ap max (inch) | f (in/rev) | Ap max (inch) | f (in/rev) | f (in/rev) | Drill Depth (inch) | |||
| Alloy Steel | 16-32 | 164-394-755 | <= 0.157 | <= 0.008 |
<= 0.134 | <= 0.007 | <= 0.0031 | <= 1.417 |
| Stainless Steel | <= 27 | 164-360-525 | <= 0.157 | <= 0.008 | <= 0.134 | <= 0.007 | <= 0.0031 | <= 1.417 |
| High Temperature Alloy | <= 25 | 65-164-295 | <= 0.157 | <= 0.008 | <= 0.134 | <= 0.007 | <= 0.0031 | <= 1.417 |
What’s Included
- Insert NOT included
- Insert Screw, wrench
