The Shars Quality Guarantee
Learn MoreLow Prices
Fast Shipping
Premium Tools
Customer Support
Featured Products

More Rigid & Less Vibration
By eliminating the shank connection between the tool holder and the indexable end mill, the modular head is more rigid and indroduces less vibration during the milling process, leaving a better workpiece surface finish. Now for APKT, ENMX, LNKT, RCKT, and VPGT inserts with a variety of flute number options.
Shop
HSK63A & HSK40E Shank
End of slitting saw holder has small holes or grooves, this is for optionally applying loc-tite to secure saw to holder. Cap must still be used and torqued. HSK40E Tool Holders are balanced to G2.5 20,000 RPM, and HSK63 Tool Holders are balanced to G2.5 30,000 RPM. Multiple arbor diameters and projection lengths available.
Shop
Bore Holes with Tight Tolerance and Accurate Location
These twin bore, coolant thru rough boring heads cover a variety of boring ranges from 0.787” to 4.72” (20mm to 120mm) depending on the size.Each roughing boring head has 2 insert cartridges designed to cut up to 10% of the final bore in high feed rate6 connection sizes along with 15 different tool holders in varying projection lengths available.
Shop
The Solid Carbide Boring Bar Advantage
Solid carbide shank boring bars can extend up to 7xD from the tool holder when cutting steels with minimal chatter or vibration (vs a steel shank that's usuallty good up to 3xD). Much stronger in stiffness and dense compared to steel shank boring bars, resulting in better accuracy and less chatter, especially when dealing with long overhangs. Ideal for deep boring operations, high precision work, materials with high cutting resistance, or situations where minimal chatter is critical.
Shop
Feel The Difference
The caliper beam and jaw are made from carbon fiber-reinforced plastic to reduce weight and improve wear resistance, making even the largest 60" size feel weightless. The nib jaw is micro lapped on the round face, allowing for accurate inside diameter measurement. The guide way surface is lapped in the direction of the slider movement, this minor detail produces an even and smooth run of the slide.
ShopFeatured Categories

Tegara HSK63A Extended Mini Nose Shrink Fit Tool Holder
Extra slim design with 1.5mm wall thickness on the nose. Tool holder is balanced to G2.5 30,000 RPM.
Shop
Aventor IP54 Digital Depth Gage
Preset mode allows the operator to input any value as an offset size for depth measurements. Guide way produces an even and smooth run on the slide.
Shop
ZCC USA Inserts
Check out the revamped ZCC USA brand page with easy insert navigability, including new SF, SF, and XM chip breaker inserts.
Shop