1" Coolant Style High Feed Indexable End Mill for SDMT Insert
SKU
404-2617
Out of Stock
Shipping UPS Ground
Details
| Mfg SKU # | 404-2617 |
|---|---|
| Indexable Milling Category | High Feed End Mill |
| Brand | Shars Tool |
| cutting diameter | 1 |
| Axial Depth of Cut ap | 0.055 |
| Radial Depth of Cut | 0.346 |
| shank size | 1 |
| Head Length | 3-3/4 |
| Overall Length | 7 |
| Insert Style | SDMT |
| Insert Size | 09T312 |
| Number of Flutes | 2 |
| Coolant Through | Yes |
| Helical | No |
Badges
Alloy Steel
Cast Iron
Stainless SteelSpotlight
- Higher feed rate than conventional 90 degree face mill
- It pairs shallow depth of cut with high feed per tooth which gives higher metal removal rates, resulting in more parts being machined
- The cutting forces are directed at the machine spindle in the axial direction which means greater stability and reduced vibrations, extending insert life and reduce spindle wear
- SDMT insert used on this cutter can be indexed 4 times, as oppose to APKT insert which can only be used on 2 sides, giving you twice the value per insert
- Insert pockets are precisely machined to provide a tight fit with the insert and also maintain a close tolerance
- Coolant port on each flute to drive away cutting chip to extend insert tool life and cutting performance
- A slightly taper on the end of the shank to allow easy access into the holding device such as tool holder or collets
Cutting Parameter
What’s Included
- Insert not included
