Explore New Videos on Instagram #sharstoolco

2" 90 degree Coolant Thru Heavy Duty Face Mill LNKT Insert

SKU
404-7953
$97.00
In stock

Shipping UPS Ground

Resources

Details

More Information
Mfg SKU #404-7953
Indexable Milling CategoryFace & Shoulder Mill
BrandShars Tool
cutting diameter2
Axial Depth of Cut ap0.591
Insert StyleLNKT
Insert Size160708
Number of Flutes4
Cutting Angle90
Coolant ThroughYes
HelicalNo
arbor hole diameter3/4
Overall Height1.75

Design

Badges

Alloy SteelAlloy Steel
Cast IronCast Iron
Stainless SteelStainless Steel

Spotlight

  • LNKT insert with 4 cutting edges suitable for milling in steel, stainless steel, cast iron and other difficult machined materials
  • Vertical mounting of the insert changes the direction of cutting forces which is absorbed by the thick carbide insert body to increase tool rigidity
  • Vertical mounting design combined with thick carbide insert increases the potential feed rate by 30% in roughing compared to horizontal mounted insert such as APKT

  • Low runout of the square shoulder leaves good surface quality in workpiece and no obvious tool marks in the contours
  • Double positive rake angle design reduces cutting forces

  • High strength tool body material with coolant thru port on each flute

  • Easy reference guide for insert number, screw, and other accessories is printed on the tool shank

 

 

  • LNKT double side insert with 4 cutting edges to maximize cost effectiveness
  • 0.315" Maximum depth of cut 
  • 0.175" Extra thick insert body to withstand high impact cutting environment
  • High strength positive cutting edge angle for increased wear resistance and reduced cutting pressures
  • Helical cutting edge is designed to achieve smoother cutting
  • Highly versatile and ultra smooth coating technology prevents chip welding for longer tool life
  • YB9320 grade combines substrate with good toughness and strength and TiAlN nano PVD coating process to yield high strength and toughness
  • Widely applicable for semi-finish milling of P type (P10-P30) and M type (M10-M30) material

 

Case Study

 

Workpiece Material:  1045
Tool: 175-190(HB)
Cutting Condition: Dry cutting
Insert Code:   LNKT120608PNR-GM(YB9320)
Cutting Speed sf/min: 850
Feed per Tooth fz in: 0.008
Depth of Cut ap in: 0.315
Working Engagement ae in: 0.079

 

Cutting Parameter

 

What’s Included

  • Insert screw, wrench
  • Insert not included

Reviews

Catalog