3" 45 degree End Mill R8 Shank SEHT Insert
SKU
404-2389
$131.95
Out of Stock
Shipping UPS Ground
Details
| Mfg SKU # | 404-2389 |
|---|---|
| Indexable Milling Category | Chamfer & Angle End Mill |
| Brand | Shars Tool |
| cutting diameter | 3 |
| Maximum Cutting Diameter | 3.52 |
| Axial Depth of Cut ap | 0.236 |
| shank size | R8 |
| Overall Length | 5.56 |
| Insert Style | SEHT, SEHW, SEKT |
| Insert Size | 1204 |
| Number of Flutes | 4 |
| Cutting Angle | 45 |
| Coolant Through | No |
| Helical | No |
Design
- Cutting Tool: 2" 45 Degree End Mill with R8 Shank SEHT Insert (SKU: 404-2388)
- Insert: SEHT43-AFSN YBG205 Carbide Insert (SKU: 424-1502)
- Materials Used: Low Alloy Steel #4140
- Hardness: 28-32 HRC
- Machine: Bridgeport R8 Spindle
- Cooling Method: None
- Operation: Face Milling
- Speeds and Feeds: IPM: 10, RPM: 1100, DOC: .030"
Badges
Alloy Steel
Heat Resistant Steel
Non Ferrous Metal
Stainless SteelSpotlight
- Suitable for most face milling applications
- Reduces vibration on long overhang applications
- Chip thinning effect allows for increased table feeds
- High Positive cutting geometry
- Photo is only showing an example of face mill/end mill from this series.
Benefit from the 45 degree lead angle allows an increase of feedrate by 50% over 90 degree face mill and also allows this face mill to used on smaller horse power mills. It uses industry standard SEHT / SEHW / SEHX 43 (ISO 1204) insert which has a positive 20 degree clearance angle. The insert pockets are designed to be 19 degree positive inclined to minimize vibration and each pocket has an chip escaping pathway to help preventing chip built-up on insert edge.
- Each insert pocket is designed to reduce run-out and extent insert life.
- Use SEKT / SEHT / SEHW 43 1204 insert (INSERT NOT INCLUDED)
- Easy reference guide for insert number, screw, and other accessories is printed on the tool shank
Cutting Parameter
What’s Included
- Insert shown in the pictures not included
- Insert screw is included
