Explore New Videos on Instagram #sharstoolco

3" 45 degree Face Mill SNEG Insert

In stock

Shipping UPS Ground



More Information
Mfg SKU #404-7951
Indexable Milling CategoryChamfer & Angle Face Mill
BrandShars Tool
cutting diameter3
Maximum Cutting Diameter3.550
Axial Depth of Cut ap0.275
Insert StyleSNEG
Insert Size1506
Number of Flutes6
Cutting Angle45
Coolant ThroughYes
arbor hole diameter1
Overall Height2



Alloy SteelAlloy Steel
Cast IronCast Iron


  • SNEG double side insert with 8 cutting edges to maximize cost effectiveness
  • 0.275" Maximum depth of cut is more than 0.236" ap from SEHT 43 insert
  • 0.218" Extra thick insert body to withstand high impact cutting environment
  • More stable for larger depth of cut than single sided insert

  • Extra thick insert body and GM chipbreaker delivers good chip breaking performances, large rake angle and reduce cutting force
  • Wiper insert available with large arc design to improve workpiece surface finish
  • Suitable for steel (P10-P30), stainless steel (M10-M30)  and cast iron


  • Each insert pocket is designed to reduce run-out and extent insert life.
  • Use SNEG 1506 insert (INSERT NOT INCLUDED)
  • Setting Angle: 45 degree
  • Radial rake angle: -7 degree
  • Axial rake angle: -5 degree
  • Easy reference guide for insert number, screw, and other accessories is printed on the tool shank


Tool Life Comparison


Workpiece Material:  NAK80(HRC36)
Tool: FMA11-5.00"-B1.50"-SN12-08
Operation: Face milling
Insert Code: SNEG1205ANR-HGR/YBG205
Cutting Speed sf/min: 650
Feed per Tooth fz in: 0.08
Depth of Cut ap in: 0.08
Working Engagement ae in: 2.0


Cutting Parameter

What’s Included

  • Insert NOT included