Each flute on this face mill cutter has a coolant path that starts from the center of the face mill body, in order to drive the coolant fluid into this coolant path, one must use a coolant-style arbor screw (not included) to connect this face mill to the coolant-thru face mill tool holder. The coolant-style arbor screw compatible for this face mill is part # 202-6295(
Sold separately).
Face Mill Center Bore with Coolant holes
Arbor Screw with Coolant Slot
Higher feed rate than conventional 90 degree face mill
It pairs shallow depth of cut with high feed per tooth which gives higher metal removal rates, resulting in more parts being machined
The cutting forces are directed at the machine spindle in the axial direction which means greater stability and reduced vibrations, extending insert life and reduce spindle wear
SDMT insert used on this cutter can be indexed 4 times, as oppose to APKT insert which can only be used on 2 sides, giving you twice the value per insert
Coolant port on each flute to drive away cutting chip to extend insert tool life and cutting performance
Insert pockets are precisely machined to provide a tight fit with the insert and also maintain a close tolerance