4" Coolant Thru High Feed Indexable Face Mill for SDMT Insert
SKU
404-2615
$150.00
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 404-2615 |
|---|---|
| Indexable Milling Category | Face & Shoulder Mill |
| Brand | Shars Tool |
| cutting diameter | 4 |
| Axial Depth of Cut ap | 0.071 |
| Radial Depth of Cut ae | 0.461 |
| Insert Style | SDMT |
| Insert Size | 120412 |
| Number of Flutes | 6 |
| Coolant Through | Yes |
| Helical | No |
| arbor hole diameter | 1-1/2 |
| Overall Height | 2-1/2 |
Badges
Alloy Steel
Cast Iron
Stainless SteelSpotlight
Each flute on this face mill cutter has a coolant path that starts from the center of the face mill body, in order to drive the coolant fluid into this coolant path, one must use a coolant-style arbor screw (not included) to connect this face mill to the coolant-thru face mill tool holder. The coolant-style arbor screw compatible for this face mill is part # 202-6297(Sold separately).
| Face Mill Center Bore with Coolant holes | Arbor Screw with Coolant Slot |
 |
 |
- Higher feed rate than conventional 90 degree face mill
- It pairs shallow depth of cut with high feed per tooth which gives higher metal removal rates, resulting in more parts being machined
- The cutting forces are directed at the machine spindle in the axial direction which means greater stability and reduced vibrations, extending insert life and reduce spindle wear
- SDMT insert used on this cutter can be indexed 4 times, as oppose to APKT insert which can only be used on 2 sides, giving you twice the value per insert
- Coolant port on each flute to drive away cutting chip to extend insert tool life and cutting performance
- Insert pockets are precisely machined to provide a tight fit with the insert and also maintain a close tolerance
Cutting Parameter
What’s Included
- Insert not included
Related Products
-
-
-
-
-
-
-
-
-
-
-
-
SKU 202-5374CAT40 1-1/2" x 2.4'' Face Shell Mill Tool HolderOnline Price Only: $62.96 Regular Price: $69.95
