Explore New Videos on Instagram #sharstoolco

Details

More Information
Mfg SKU #690V
Vise CategoryMilling Machine Vises
BrandTegara
Vise ApplicationCNC machine, manual machine
Jaw Opening8.95
Jaw Width6
Jaw Depth1.75
Overall Length17.20
Bed Height +/-0.0005"2.875
With Swivel Baseno
Jaw Plate Thread Size1/2"-13
Jaw Plate Threads Spacing (inch)3.875
Clamping Force (Lbs)8200

Design

Craftmanship

  • tegara 690 milling machine vise

    Micron Lapping

    A gang of vise body gone through time consuming grinding process with micron accuracy on a CNC grinder

  • tegara 690 milling machine vise

    Eye Inspection

    Each vise body will be put under the microscope to filter out unsatisfying cast iron bodies before assembling

  • tegara 690 milling machine vise

    Smooth Movement

    Semi-hardened bright finished lead screws with precision turned threads to give them a solid & smooth feel when turning the vise handle

Spotlight

  • Minimum Jaw Lift



    Every machinist is afraid of the term "jaw lift" when associated with a vise. The 690X offers key improvements to prevent jaw lifting by using a 45 degree wedge and a pivoting ground finished steel hemisphere in a milled pocket to hold down the movable jaw. This results a minimal amount of jaw lift applying under pressure when comparing to other highly regarded go-to branded vises.

  • 8.897" Opening Capacity



    8.897" Opening capacity allows more clamping in a small footprint.

  • Hardened Vise Bed / Jaw Plate


    -Vise jaw plate threads and spacing meets the industry standards
    - Bedways are flame hardened to 45 HRc and jaw plate hardened to 54 HRc
    - Bed height and the distance between keyway and stationary jaw remains the same and meets the industry standards
    - Bed height matched to 2.875" +/- 0.0005"
    - Vises' bed parallel to base within 0.0005"
    - Fixed Jaw perpendicular to bed within 0.0005"
    - Fixed jaw parallel to vise's keyway within +/- 0.0005"

  • Brush Seal



    A brush on both end of spindle nut to wipe off chips to improve & extend the lead screw life.

  • Large Chip Evacuation



    2 large chip evacuation slots are strategically located on each side of the vise to allow a good flow of chips while at the same time not diminishing the vise’s body strength. The vise body is also reinforced with a thicker rib to support the pulling mechanism when clamping

  • Matching Bed Heights



    When ordering multiple vises, the bed heights will be matched within .0001" at no additional cost (subject to inventory stock availability)

  • Warranty

    Tegara vise comes with 10 year limited warranty against defects in material and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear). Failure to properly maintain and/or properly operate the product or part under normal conditions will void this warranty. This warranty does not cover any product or part that has been worn out, abused, heated, ground or otherwise modified, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.

Parts List

690V-20 690V-6 690V-14
O Ring Vise Nut and Brush Pair Jaw Plate - One Pair
690V-Key2 690V-Key1 690V-4
Vise Key 11/16" Vise Key 11/16" to 5/8" Vise Bearing Thrust Collar
690V-2-3-5 690V-16-17-18 690V-9
Main Screw + Collar + Collar Set Vise Handle Adjusting Screw
 
690V-10 690V-19  
Spring Vise Chip Cover  

What’s Included

Reviews

Catalog