6" x 14" 2 Axis DRO Digital Readout Glass Linear Lathe System Package
SKU
303-9499
$484.35
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 303-9499 |
|---|---|
| Brand | Shars Tool |
| Digital Readout Category | Lathe Package |
| Number of Axis | 2 |
| cross travel (x) | 6 |
| longitudinal travel (y) | 14 |
| resolution | 0.0002" |
| Accuracy | 0.0002 |
| Overall Length | 11.10 x 18.97" |
| For Use With | KA300 / KA500 |
Spotlight
-
DRO Setup Menu
How to set up scale resolution, scale travel direction, machine type selection (mill/lathe/EDM), compensation type, absolute / relative / user input coordinate, zero out X and Y
-
Change Decimal Place
How to change the decimal place from 5 digit to 4 digit in inch reading on your DRO. 3 decimal places indicate metric mode.
-
Linear Error Compensation
How to find inaccuracies on your machine's travel and use the linear error function to compensate this inaccuracy on your DRO. Maximum compensation range is -1.5mm to 1.5mm.
-
Lathe Diameter to Radius
How to toggle the X axis measurement on the DRO between radius or diameter. This function only works on X axis which should be the cross slide's travel.
Feature of digital readout (2-Axis and 3-Axis)
- 7 digits with plus or minus symbol
- Resolution: .0002" or .005mm
- Absolute/Relative coordinate display mode
- Inch/metric conversion
- Zero reset/Data Preset
- Center Find / ½ Function
- Radius/Diameter Reading
- Home Reference
- Line Error Compensation
- Segmented Error Compensation
- User defined memory storage coordinates up to 200 points
- Self Diagnostics in start up
- Programmable resolution setting by Axis
- Programmable direction by Axis
- Sleep mode
- RS232 communication port <
Lathe Specific features:
- Taper calculations
- Axis Summing
- User defined memory storage coordinates up to 200 points
- User defined memory storage of cutting tool coordinates
Glass Scale Linear Encoder Features:
- Standard IP53 Rating (dust protected and protect against spraying water)
- Accuracy of +/-0.0002” (+/- 5 um) +/- .0004” (+/- 10 um)
- Resolution of .0005”/.0002”
- TTL signal output, 9 pin socket
KA-500 6" Scale (Diagram dimensions in mm)
- L0 Travel Length= 6.69"
- L1 Distance between installation holes= 10.71"
- L2 Overall Length=11.10"
KA-300 14" Scale (Diagram dimensions in mm)
- L0 Travel Length= 14.57"
- L1 Distance between installation holes= 18.11"
- L2 Overall Length= 18.74"
What’s Included
- All mounting hardware
- Digital Reader head with armored cable and installation arm
- 2 Linear glass scales
- Scale, scale cover, and scale support brackets
- Operating manual