|Mfg SKU #||202-1054|
|Wedge Clamp Style||Vise|
|Single or Double Wedge||Single|
|Clamping Force (Lbs)||5620|
|Base Depth||0.945" / 24mm|
|Jaw Hardness (HRC)||52-56|
|Edge Surface Type||Serrated|
|Minimum Jaw Spread||1.49" / 38mm|
|Optimum Jaw Spread||1.57" / 40mm|
|Maximum Jaw Spread||1.65" / 42mm|
|Projection From Base||0.098" / 2.5mm|
Wedge clamp expands simultaneously in both directions with a single turn on the tightening screw to push the workpiece against fixture stops. Wedge clamp typically fits between workpiece and has a small footprint on a fixture plate to allow maximum machinable space left for workpiece. Low profile clamp also has less tooling interferences, saving in tool changes and extending cycle efficiency. It's a very reliable and versatile workholding solution on a fixture plate in vertical or on a tombstone on horizontal machining environment.
Dovetail Design Center wedge block engages the jaw with downward dovetail design to create a push-down force which prevent any jaw lifts when tightening down, while dovetail engagement minimized any sliding movement in horizontal plane.
Micro Lapped Dovetail between the center wedge block and the jaw are micro lapped on a CNC grinder to ensure tight tolerance. Each set's individual component can be swapped out with a new component while minimized plays between components and still holding the clamping rigidity.