Any-Vise Model #F-SO Low Profile Single Vise Wedge Clamp
SKU
202-1060
$144.20
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 202-1060 |
|---|---|
| Wedge Clamp Style | Vise |
| Brand | Tegara |
| Single or Double Wedge | Single |
| Machinable | No |
| thread size | 5/8-11 |
| Clamping Force (Lbs) | 24729 |
| Base Height | 1.142 |
| Base Width | 2.283 |
| Base Depth | 1.732" / 44mm |
| Jaw Hardness (HRC) | 52-56 |
| Edge Surface Type | Smooth |
| Minimum Jaw Spread | 2.20" / 56mm |
| Optimum Jaw Spread | 2.28" / 58mm |
| Maximum Jaw Spread | 2.42" / 61.6mm |
| Projection From Base | 0.196" / 5mm |
Design
Design
Back to the Drawing Board
Wedge clamp expands simultaneously in both directions with a single turn on the tightening screw to push the workpiece against fixture stops. Wedge clamp typically fits between workpiece and has a small footprint on a fixture plate to allow maximum machinable space left for workpiece. Low profile clamp also has less tooling interferences, saving in tool changes and extending cycle efficiency. It's a very reliable and versatile workholding solution on a fixture plate in vertical or on a tombstone on horizontal machining environment.
Spotlight
-
Dovetail Design Center wedge block engages the jaw with downward dovetail design to create a push-down force which prevent any jaw lifts when tightening down, while dovetail engagement minimized any sliding movement in horizontal plane.
-
Micro Lapped Dovetail between the center wedge block and the jaw are micro lapped on a CNC grinder to ensure tight tolerance. Each set's individual component can be swapped out with a new component while minimized plays between components and still holding the clamping rigidity.
- Flat jaws are hardened to 52-56 HRc and the serration face creates reliable gripping contact with workpiece
- 5 Year limited warranty on the center wedge block and jaws
- Made in Taiwan