Check out our Instagram page @sharstoolco

BT40 1/2" x 1.75" Balanced G2.5 20,000RPM End Mill Tool Holder

SKU
202-7149G
Out of Stock

Shipping UPS Ground

Resources

Details

More Information
Mfg SKU #202-7149G
Tool Holder CategoryEnd Mill Holder
BrandShars Tool
shank sizeBT40
Bore Diameter1/2
projection length1.75
end mill holder stylestub
max rpm balanced toG2.5 20000
TIR (inch)0.0002
drawbar thread sizeM16x2.0
Nose Diameter1.38
Dual Contact Tool HolderNo

Design

Craftmanship

  • shars cat40 tool holder

    AT3 or Better

    Taper ground to AT3 or better ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance

  • shars cat40 tool holder

    Pilot Contact

    Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity

  • shars cat40 tool holder

    Taper End Face

    Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity

Tech Specification

  • Taper Size

    BT40

  • Bore Diameter

    1/2"

  • Projection Length

    1.75"

  • Bore Tolerance

    H6

  • TIR (at nose face)

    < 0.0001"

  • Max Balanced To

    G2.5 20000 

  • Coolant Type

    Thru Spindle

  • Rear Thread Size

    M16x2

  • Nose Diameter

    1.38"

Spotlight

  • Dynamic Balancing

    Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany.  Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish. 

  • Pre-Balance Design

    Unique design feature in the extension nose to minimize the off-balance nature of BT 40 taper specification.  On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole.  And when the holder is placed into the Haimer balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.

  • Mirror Finish



    To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish.

  • Flange and V-groove are precision ground to ensure reliable tool change
  • Spindle Thru coolant capability

What’s Included

Reviews

Catalog