CAT40 3/4" x 4" Face Shell Mill Tool Holder
SKU
202-6506
$75.95
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 202-6506 |
|---|---|
| Tool Holder Category | Face Mill Holder |
| Brand | Shars Tool |
| shank size | CAT40 |
| projection length | 4 |
| max rpm balanced to | G6.3 15000 |
| TIR (inch) | 0.0002 |
| drawbar thread size | 5/8x11UNC |
| Nose Diameter | 1.75 |
| arbor diameter | 3/4 |
| Arbor Screw Diameter | 0.56 |
| Key Width for Face Mill Keyway | 0.31 |
Spotlight
- Dynamically balanced to 15,000RPM at G6.3 by Haimer balancing machine at all location for consistent balance
- H6 arbor tolerance to improve cutter chattering and overall cutting tool life
- T.I.R. 0.0002" measured from CAT40 taper to face and arbor
- Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a "wall" is built around this hole to compensate the weight of the metal chips lost from forming this spherical hole. This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
- Made from alloy steel harden to 54-60 HRc
- Taper ground to AT3 or better accuracy standard for maximum contact with spindle. All of SHARS CAT/BT/HSK tool holder use Stotz Air/Electronic Gaging for production and finish inspection. Stotz has been chosen by major aircraft companies as the best and most consistent gaging for tool holder shanks
- All critical surface are precision ground
- Each holder comes with a lab certificate on its taper accuracy and runout measurement
What’s Included
- The included arbor screw is NOT coolant thru. For coolant thru capability, please purchase an optional coolant thru arbor screw from the Related Product
