Check out our Instagram page @sharstoolco

Details

More Information
Mfg SKU #202-1909
Tool Holder CategoryEnd Mill Holder
BrandTegara
shank sizeCAT50
Bore Diameter1/2
projection length2.625
end mill holder stylestandard
max rpm balanced toG2.5 20000
TIR (inch)0.0001
drawbar thread size1-8UNC
Nose Diameter1.37
Dual Contact Tool HolderNo
Coolant ThroughYes

Design

Craftmanship

  • shars cat40 tool holder

    AT3 or Better

    Taper ground to AT3 or better ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance

  • shars cat40 tool holder

    Pilot Contact

    Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity

  • shars cat40 tool holder

    Taper End Face

    Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity

Tech Specification

  • Taper Size

    CAT50

  • Bore Diameter

    1/2"

  • Projection Length

    2.625"

  • Bore Tolerance

    H6

  • TIR (at nose face)

    < 0.0001"

  • Max Balanced To

    G2.5 20,000 RPM

  • Coolant Type

    Thru Spindle

  • Rear Thread Size

    1 - 8

  • Nose Diameter

    1.37"

Spotlight

  • Dynamic Balancing

    Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany.  Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish. 

  • Pre-Balance Design

    Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification.  On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole.  And when the holder is placed into the Haimer balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.

  • CAT40 1/2" End Mill Tool Holder in Action

    Cutting Tool: Gorilla Mill 1/2" 3 Flute Silverback Knuckle Dragger Series (SKU# 422-3122)

    Workpiece Material: 6160 Aluminum

    Machine: CNC 3-axis machining center

    RPM: 15000 ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎IPT: 0.005

    SFM: 1963 ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎DOC: 1.0

    IPM: 225


  • Flange and V-groove are precision ground to ensure reliable tool change
  • Spindle Thru coolant capability

What’s Included

Reviews

Catalog