Check out our Instagram page @sharstoolco

Details

More Information
Mfg SKU #202-1462
Tool Holder CategoryCollet Chuck
BrandTegara
shank sizeCAT50
projection length6
max rpm balanced toG2.5 20000
TIR (inch)0.0001
drawbar thread size1-8UNC
Stop Screw Thread SizeM24 x 1.5
Dual Contact Tool HolderNo
collet seriesER32
collet chuck stylelong reach
collet nut diameter1.97
Collet Nut StyleSlotted
Maximum Torque Ft/Lb125

Design

Craftmanship

  • shars cat40 ER tool holder

    Mirror Finished

    Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance

  • shars cat40 tool holder

    Pilot Contact

    Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity

  • shars cat40 tool holder

    Taper End Face

    Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity

Tech Specification

  • Taper Size

    CAT50

  • Collet Series

    ER32

  • Projection Length

    6.0000"

  • Collet Size Range

    0.09375" - .78125"

  • TIR (at collet face)

    < 0.0001"

  • Max Balanced To

    G2.5 20,000 RPM

  • Coolant Type

    Thru Spindle

  • Max Torque

    125 ft/Lbs

  • Collet Nut Diameter

    1.97"

Spotlight

  • Pre-Balance Design



    Unique design feature in the flange to minimize the off-balance nature of CAT 50 taper specification.  On the shoulder under the flange, a side is mill flat to compensate the weight of the metal chips lost from forming the spherical hole in the flange.  This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.

  • Mirror Finish



    To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish.

  • High Torque Collet Nut



    The maximum torque is laser marked on the ER collet nut face to take the guess game out of the way to ensure proper amount of force should be applied while tightening. Innovative coating process significantly increases the clamping force by 75% compared to standard ER collet nut. More gripping force provides better rigidity and reduces the possibility of losing grip on the round shank which lead to expensive damage on cutting tools and work piece material.

  • Asymmetrical O-Ring



    Internal clamping ring's shape is design to minimize out-of-balance compare to the standard off-center o-ring design from other standard ER collet nut, achieving 12,000 RPM without needed to drill holes on the collet nut body when placed on a dynamic balanced machine to preserve ER collet nut's body strength.

Reviews

Catalog