DE313 1/8" - 1/2" Drill Bits and End Mill Industrial Sharpener Grinder

SKU 101-1011

DE313 1/8" - 1/2" Drill Bits and End Mill Industrial Sharpener Grinder

Availability In stock

Shipping Ups Ground

$1,600.00
SKU 101-1011
Brand Shars Tool
Full Details

Product Spotlight

Motor: 1/3 HP, 1 Phase 110 Volt Drill capacity: 1/8" - 1/2"
Spindle Speed: 4000 RPM Drill Point Angle: 118 degree - 135 degree
Power: 250 Watts End Mill Capacity: 5/32" - 1/2"
Net Weight: 57 Lbs End Mill Flute: 2 Flute, 3 Flute, 4 Flute

 

           
Application
  • A combo sharpener unit capable of grinding both twist drill bit and end mill
  • Easy to operate: plug in the cutting tool holder into the designated slot and let the grinder perform the pre-designed grinding operation

  • Fool proof design, portable, simple operating and high precision grinding
  • Easy to setup with standard ER20 collets which has a lower runout tolerance than 5C or R8 collet

  • Using the inch size veriner dial to set up the cutting tool in appropriate length for drill bit or diameter for end mill

  • Grinding range of 1/8" - 1/2" for drill bit and 5/32" - 1/2" for end mill
  • Capable of sharpening the front rake, front tip angle and clearance angle of drill bits
  • Drill tightened design with bearing device
  • Capable of find adjustment on center point

  • CBN wheel service lifetime on average of 8000 grinding operation

 

ER20 Collet 11 pcs Set Cutting Tool Holder CBN Wheel

 

WHY DOES OUR GRINDER EXPORT TO GERMANY MORE THAN 1,000 UNITS PER YEAR?

  • Our grinder uses a special grinding motor, built-in custom bearings, and seals which provides it with a longer motor life and allows it to run more soundlessly than other ordinary grinders
  • Solenoid switch has been used which ensures in cases of a sudden power outage, power phase loss, or other emergency situations that the switch will lose power first and protect the safety of the motor in order to improve electrical safety
  • All Grinders’ handles use adjustable handles which have more flexibility
  • All Grinders’ main parts are manufactured to exact technical requirements.  Through multiple heat treatment processes,   the grinder's durability and accuracy is greatly improved.
  • Each Grinder has to pass German quality standards and large quantities are exported to European markets
  • Each Grinder has a manual and stamped factory certificate. The manufacturer is ISO 9001 certified. Also, there is a serial number on each box which can traced to the original information about each grinder

What's Included

  • 2 pcs of cutting tool holder: 1 for 2 flute & 4 flute end mill or drill bits; 1 pc for 3 flute end mill
  • ER20 collets: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 13/32", 7/16", 1/2"
  • 3 pcs of CBN Wheel

 

CBN Wheel Size Grit Size Application
77.60mm D x 10.10mm T x 12.70mm Arbor hole 200 grit HSS & Cobalt drill bit
Step Wheel 80.20mm D x 10.20mm T x 19.05mm Arbor hole 300 grit 1/8" - 7/32" HSS & Cobalt End Mill
80.20mm D x 10.20mm T x 19.05mm Arbor hole 120/300 grit 1/4" - 1/2" HSS & Cobalt End Mill

Reviews