Haimer Center 3-D Sensor w/Straight Probe 5mm
SKU
303-3239
$645.50
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 80_300_00_FHN |
|---|---|
| Layout Setup Category | Center Indicators (Co-Ax & 3D) |
| Brand | Haimer |
Spotlight
Provides quick and precise location of the centers of bores and shafts
Dial Gauge always in sight
The probe tip slides at low spindle speed along the surface of the workpiece. Its movement is transferred to the pointers of the dial gauge. The housing of the Centro does not rotate with the spindle and thus the dial gauge always stays within sight of the operator.
Centro finds the axis you wanted.
For sure, the pointers deflect as long as the spindle and the wanted axis do not coincide. Now the position of the spindle can be corrected until the pointers come to the standstill. The wanted axis is found.
Further advantages:
- Checking face run of surface to spindle.
- Compensation of the run-out errors of the spindle and tool holder >> No adjustment necessary.
- The unusual big sized dial gauge eliminates every single imprecision.
- Replaceable probe.
Specification:
- Straight probe Tip: 5mm
- Shank Size: 16mm
- Centering Accuracy:0.003mm
- Max. Rotation Speed: 150/min
- Measuring range interior diameter Drill: 3-125mm
- Measuring range exterior diameter (Shaft, with probe tip bent): 0-125mm
Probe tips for Centro
The Centro can be equipped with a straight [ball Ø 2 mm (0.08") / 5 mm (0.2")] and a bent (ball Ø 5 mm / 0.2") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
Technical drawing
| L1 [inch] | 3.6 |
|---|---|
| L2 [inch] | 1.89 |
| Ø D1 [inch] | 0.63 |
| Ø D2 [inch] | 0.2 |
| B [inch] | 3.15 |
| Smallest unit of measure [inch] | 0.0004 |
| Centering accuracy [inch] | 0.0001 |
| Max. rotation speed [rpm] | 150 |
| Measuring range interior diameter (drill hole) [inch] | 0.1 - 5 |
| Measuring range exterior diameter (shaft, with probe tip bent) [inch] | 0 - 5 |
