Mitee-Bite 26088 1/2-13 Machinable Pitbull Clamps 2 pcs Set
Shipping UPS Ground
Shipping UPS Ground
Mfg SKU # | 26088 |
---|---|
Clamping Category | Toe Clamp |
Brand | Mitee-Bite |
Pitbull Clamp Style | Tool Steel, Machinable |
thread size | 1/2-13 |
Material | steel |
Number of Pieces | 2 |
Edge Surface Type | Serrated |
Clamp Width | 1-1/2 |
Clamping Force (Lbs) | 12000 |
Maximum Torque Ft/Lb | 108.33 |
total throw (inch) | 0.0750 |
extension length | 0.7700 |
Machinable Pitbull® Clamps The popular Pitbull® Fixture Clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, reducing material cost and number of operations. The Machinable Pitbull® Clamp is made of A2 tool steel and heat treated to about 43RC for long life, yet still machinable. There is additional material on the clamping face to allow for machining a radius. It is available in two sizes with 6,000 and 12,000 lbs. (26000 and 50000 N) of holding force. A dowel pin is included in each package to locate clamp while machining radius.
Features Well suited for machining pieces complete in one setup. Made of tool steel and heat treated to about 43RC for long life. Additional material on the clamping face to allow for machining a radius.
Application Tighten clamp on dowel pin for proper location for machining clamp . Remove pin and install o-ring to clamp workpiece.
Recommend Stock Maximum recommended stock removal from centerline of clamp: 26077 = .060" 26088 = .180"
A | B | C | D | E | F |
.600" | .640" | 1.50" | .375" | .770" | 1.70" |