Mitsubishi 1" Modular 90 degree Indexable End Mill Milling Head AOMT Insert
SKU
APX3000UR163AM12A35
$327.87
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 10533109 |
|---|---|
| Indexable Milling Category | Modular Milling Head |
| Brand | Mitsubishi |
| cutting diameter | 1 |
| Axial Depth of Cut ap | 0.394 |
| Cutting Head Connection Thread Pitch M | M12 |
| Pilot Diameter | 0.492 |
| Overall Length | 2.244 |
| projection length | 1.38 |
| cutting direction | Right Hand |
| Insert Style | AOGT, AOMT |
| Insert Size | 123602, 123608, 123620 |
| Number of Flutes | 3 |
| Cutting Angle | 90 |
| Coolant Through | Yes |
| Helical | No |
Badges
Alloy Steel
Cast Iron
Heat Resistant Steel
Non Ferrous Metal
Stainless SteelSpotlight
Multi-functional shoulder milling system
• Large depth of cut
• A versatile programme for slotting, side milling and ramping
• New Miracle Sigma grades availlable
-
APX3000 Series End and Face Mills
Multifunctional End and Face Mills producing chips utilizing a variety of milling techniques.
Milling wide range of diameters start at .500".
-
High Rigidity Cutter Bodies
Rigidity has been increased by using a larger amount of backing metal behind the insert. Resisitance to corrosion and abrasion on the cutter bodies made possible by using a superior highly heat resistant alloy and a special surface treatment. The cutter bodies are designed with through coolant holes to improve cooling and chip disposal.
-
Screw-In Head
Thoroughly clean the clamp section of the head and the arbor with an air blower or brush before installation.
Tighten the head at the recommended torque and ensure that there is no gap between the head and arbor.
| Screw Size |
Recommended Torque(lbf-ft) |
Wrench Size(mm) |
|---|---|---|
| M8 | 17.1 | 0.394" |
| M10 | 33.8 | 0.551" |
| M12 | 59.2 | 0.748" |
| M16 | 66.7 | 0.945" |
What’s Included
- Insert NOT included
