Mitsubishi AOMT123608PEER-H MP6130 Milling Insert
SKU
AOMT123608PEER-H-MP6130
$14.90
In stock
Shipping UPS Ground
Mitsubishi AOMT123608PEER-H MP6130 Milling Insert is available to buy in increments of 10
Details
| Mfg SKU # | 800411 |
|---|---|
| Indexable Insert Category | Milling Inserts |
| Brand | Mitsubishi |
| To be used on | Alloy Steel |
| Application | Light Roughing |
| ANSI Number | AOMT123608PEER-H |
| Insert Style | AOMT |
| Insert Thickness | 0.142 |
| corner radius | 0.031 |
| Insert Grade | MP6130 |
| Chip Breaker | H |
| Axial Depth of Cut ap | 0.394 |
| cutting direction | Right Hand |
| Insert Width | 0.26 |
Badges
Alloy SteelSpotlight
-
Low Cutting Resistance Inserts
Advanced simulation technology has been utilized to develop the inserts. Efficient machining on low rigidity machines and workpieces is now possible and is ideal for thin wall or extended reach applications.
Ideal Heat Disposal and Chip Control
Heat generated during cutting has been reduced due to the APX's special geometry. Ideal chip shape fromed by the insert for easy disposal.
Insert Chipbreaker
Rake angle when the insert is set in the cutter body.
New MIRACLE SIGMA PVD-Milling Grades
• 6 new grades for steel, stainless steel and HRSA
• Developed for the most common indexable mills
• MIRACLE SIGMA for highest productivity and tool life
-
New PVD Coating
The accumulated layers of AlTiCr-N based PVD coatings provide extremely high levels of wear, heat, fracture and welding resistance at high speeds and feeds.
-
Highest Productivity and Tool Life
Mitsubishi Materials has launched an exciting new range of PVD coated carbide milling grades; MP6000 Series is optimized for machining steel. It able to maximize productivity by enabling the optimum insert to be chosen according to the application, without a compromise in cutting conditions that is sometimes necessary with a general purpose grade.
-
Miracle Sigma
Indexable insert milling applications naturally have intermittent contact with the workpiece that can cause problems such as thermal cracking of carbide inserts, especially during wet cutting. However the multi-layering of the new coating helps prevent any crack propagation through to the carbide substrate, this in turn dramatically improves the overall fracture resistance of the insert. Mitsubishi has called this feature, TOUGH-Σ technology.
MIRACLE SIGMA technology has been used across all the new grades but has been adapted and optimized for each type. The MP6000 inserts have an Al-Cr top coating that offers the best solution for wear and welding resistance to steels.
The new grades are available in several different geometries and chipbreaker styles to suit Mitsubishi‘s range of high performance milling cutters. Over 50 different insert types are available for the range of face- and shoulder milling cutters.
-
MP6100 ISO-P
MP6100: PVD multi-layer coated carbide milling grades for ISO-P material group. High wear and thermal cracking resistance allows higher cutting speeds compared to conventional PVD coated carbide grades.
What’s Included
- 10 pieces per case