Mitsubishi SEET13T3AGEN-JL MP6130 Milling Insert
SKU
SEET13T3AGEN-JL-MP6130
$17.37
Direct from Mfg.
Shipping UPS Ground
Mitsubishi SEET13T3AGEN-JL MP6130 Milling Insert is available to buy in increments of 10
Details
| Mfg SKU # | 800533 |
|---|---|
| Stock Availability | Direct from Mfg. |
| Indexable Insert Category | Milling Inserts |
| Brand | Mitsubishi |
| To be used on | Alloy Steel |
| ANSI Number | SEET13T3AGEN-JL |
| ISO Number | SEET13T3AGEN-JL |
| Insert Style | SEET |
| Inscribed Circle | 0.528 |
| Insert Thickness | 0.156 |
| Thru Hole | 0.169 |
| corner radius | 0.059 |
| Insert Grade | MP6130 |
| Chip Breaker | JL |
| cutting direction | Neutral |
Badges
Alloy SteelSpotlight
-
Chipbreakers For A Wide Range of Application
New MIRACLE SIGMA PVD-Milling Grades
• 6 new grades for steel, stainless steel and HRSA
• Developed for the most common indexable mills
• MIRACLE SIGMA for highest productivity and tool life
-
New PVD Coating
The accumulated layers of AlTiCr-N based PVD coatings provide extremely high levels of wear, heat, fracture and welding resistance at high speeds and feeds.
-
Highest Productivity and Tool Life
Mitsubishi Materials has launched an exciting new range of PVD coated carbide milling grades; MP6000 Series is optimized for machining steel. It able to maximize productivity by enabling the optimum insert to be chosen according to the application, without a compromise in cutting conditions that is sometimes necessary with a general purpose grade.
-
Miracle Sigma
Indexable insert milling applications naturally have intermittent contact with the workpiece that can cause problems such as thermal cracking of carbide inserts, especially during wet cutting. However the multi-layering of the new coating helps prevent any crack propagation through to the carbide substrate, this in turn dramatically improves the overall fracture resistance of the insert. Mitsubishi has called this feature, TOUGH-Σ technology.
MIRACLE SIGMA technology has been used across all the new grades but has been adapted and optimized for each type. The MP6000 inserts have an Al-Cr top coating that offers the best solution for wear and welding resistance to steels.
The new grades are available in several different geometries and chipbreaker styles to suit Mitsubishi‘s range of high performance milling cutters. Over 50 different insert types are available for the range of face- and shoulder milling cutters.
-
MP6100 ISO-P
MP6100: PVD multi-layer coated carbide milling grades for ISO-P material group. High wear and thermal cracking resistance allows higher cutting speeds compared to conventional PVD coated carbide grades.
MIRROR-MAN
David Lee Zepeda from CA
"Cutting some 6061 on the Cincinnati Arrow 750. They are for sure great tools!"
-
What’s Included
- 10 pieces per case