DE314 1/8" - 1/2" Drill Bits and End Mill Industrial Sharpener Grinder
SKU
101-1040
$1,680.00
In stock
Shipping UPS Ground
Details
| Mfg SKU # | 101-1040 |
|---|---|
| Brand | Shars Tool |
| drill size range | 1/8-1/2" |
| Drill Point Angle Range | 95-135 |
| End Mill Size Range | 5/32 - 1/2 |
| Number of Flutes | 3, 4, 5 |
| Motor | 1/8 HP, 1 Phase, 110 V, 60 Hz |
| Horse Power | 1/8HP |
| Power | 200 W |
| Maximum RPM | 4400 |
Spotlight
| Motor: | 1/8 HP, 1 Phase 110 Volt | Drill capacity: | 1/8" - 1/2" |
| Spindle Speed: | 4400 RPM | Drill Point Angle: | 95 degree - 135 degree |
| Power: | 200 Watts | End Mill Capacity: | 5/32" - 1/2" |
| Net Weight: | 35 Lbs | End Mill Flute: | 2 Flute, 3 Flute, 4 Flute |
| Application |  |
 |
 |
 |
 |
- A combo sharpener unit capable of grinding both twist drill bit and end mill
- Easy to operate: plug in the cutting tool holder into the designated slot and let the grinder perform the pre-designed grinding operation
- Fool proof design, portable, simple operating and high precision grinding
- Easy to setup with standard ER20 collets which has a lower runout tolerance than 5C or R8 collet
- Using the inch size veriner dial to set up the cutting tool in appropriate length for drill bit or diameter for end mill
- Capable of sharpening the front rake, front tip angle and clearance angle of drill bits
- Drill tightened design with bearing device
- Capable of find adjustment on center point
- CBN wheel service lifetime on average of 3000 grinding operation
| ER20 Collet 11 pcs Set | Cutting Tool Holder | CBN Wheel |
|---|---|---|
 |
 |
 |
What’s Included
- 3 pcs of cutting tool holder: 1 pc for drill bits, 1 pc for 2 flute & 4 flute end mill; 1 pc for 3 flute end mill
- 11 pcs of ER20 collets size in inch: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 13/32", 7/16", 1/2"
- 1 pcs of CBN Wheel for HSS & cobalt drill bits or end mill and 1 pc diamond wheel for solid carbide end mill
| Wheel Size | Grit Size | Application |
| 78mm D x 10mm T x 12.63mm Arbor hole CBN Wheel | 230 grit | 1/8" - 1/2" HSS & Cobalt drill bit or end mill |
| 78mm D x 10mm T x 12.63mm Arbor hole Diamond Wheel | 230 grit | 5/32" - 1/2" solid carbide End Mill |
