| SKU | 202-6928 |
|---|---|
| Tool Holder Category | Screw-In Threaded Holder |
| shank size | BT30 |
| Cutting Head Connection Thread Pitch M | M12 x 1.75 |
| Internal Thread Depth | 25mm |
| Pilot Diameter | 12.5mm |
| Pilot Depth | 9mm |
| projection length | 1 |
|---|---|
| max rpm balanced to | G2.5 20000 |
| TIR (inch) | 0.0001 |
| drawbar thread size | M12x1.75 |
| Nose Diameter | 0.95 |
| Dual Contact Tool Holder | No |
Start to Finish
We optimize our process for both efficiency and accuracy by utilizing Kawasaki robotic arms to load and unload bar stock into the Mazak multi-tasking machine centers. We use SCM420 alloy steel to lay the foundation and case harden to RC 57-59 with a core of RC 34-39 to provide good core strength and maximize wear life. The core creates a dampening effect which reduces vibration in high speed milling to improve surface finish. The AT3 or better taper accuracy ensures 80% or better taper contact with spindle and using Stotz Air/Electronic Gaging for inspection on the taper. We precision grind the internal bore surface to <.0002" TIR and all bores are ground on a CNC grinder to ensure close run-out tolerance and evenly contact between the collet and the bore pocket. We use Haimer laser balancing machines to deliver a tool that can operate flawlessly at 20000 RPM and Mitutoyo or Mahr indicators to check the run out.
Craftsmanship
-
Mirror Finished
Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance
-
Pilot Contact
Inside bore are precision ground to engage a better contact with indexable cutter's pilot to increase rigidity
-
Taper End Face
Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity
Tech Specification
-
Taper Size
BT30
-
Internal Thread Pitch
M12.5 x 1.25
-
Internal Thread Depth
25mm
-
Pilot Diameter
12.5mm
-
Pilot Depth
9mm
-
Nose Diameter
0.95
-
Coolant Type
Thru Spindle
-
Runout
.0001" from taper to pilot bore
-
Max Balanced To
G2.5 20,000 RPM
Product Spotlight
- This tool holder accepts all threaded screw-in indexable mililng cutter which are often called modular indexable tooling, screw in or threaded shank cutter
- Precision ground flat on the shoulder and internal pilot diameter that will self center the threaded indexable cutter
- By accepting right-hand thread cutter into the tool holder, apply cutting force onto the cutter would increase the bond between the cutter and the tool holder
- Runout is less than .0001" from taper to pilot bore
- Made from alloy steel hardened to 54-60 HRc
Related Products
