BT30 M16x2.0 1" Screw-In Threaded Tool Holder

SKU 202-6930

BT30 M16x2.0 1" Screw-In Threaded Tool Holder

Availability In stock

Shipping Ups Ground

SKU 202-6930
Mfg SKU # 202-6930
Tool Holder Category Screw-In Threaded Holder
Brand Shars Tool
shank size BT30
Cutting Head Connection Thread Pitch M M16 x 2.0
Internal Thread Depth 27mm
Pilot Diameter 17.0mm
Pilot Depth 10mm
projection length 1
max rpm balanced to G2.5 20000
TIR (inch) 0.0001
drawbar thread size M16x2.0
Nose Diameter 1.22
Dual Contact Tool Holder No
Full Details


  • shars cat40 ER tool holder

    Mirror Finished

    Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance

  • shars cat40 tool holder

    Pilot Contact

    Inside bore are precision ground to engage a better contact with indexable cutter's pilot to increase rigidity

  • shars cat40 tool holder

    Taper End Face

    Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity

Tech Specification

  • Taper Size


  • Internal Thread Pitch

    M16 x 2.0

  • Internal Thread Depth


  • Pilot Diameter


  • Pilot Depth


  • Nose Diameter


  • Coolant Type

    Thru Spindle

  • Runout

    .0001" from taper to pilot bore

  • Max Balanced To

    G2.5 20,000 RPM

Product Spotlight

  • This tool holder accepts all threaded screw-in indexable mililng cutter which are often called modular indexable tooling, screw in or threaded shank cutter
  • Precision ground flat on the shoulder and internal pilot diameter that will self center the threaded indexable cutter
  • By accepting right-hand thread cutter into the tool holder, apply cutting force onto the cutter would increase the bond between the cutter and the tool holder
  • Runout is less than .0001" from taper to pilot bore
  • Made from alloy steel hardened to 54-60 HRc