Explore New Videos on Instagram #sharstoolco

Details

More Information
Mfg SKU #202-7485
Tool Holder CategoryShrink Fit Holder
BrandTegara
shank sizeCAT40
Bore Diameter3/8
projection length4.72
end mill holder stylestandard
max rpm balanced toG2.5 25000
TIR (inch)0.0001
drawbar thread size5/8x11UNC
Nose Diameter0.49
Bore Depth1.18
Coolant ThroughNo

Design

Craftmanship

  • curved shrink fit holder

    Mirror Finished

    Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance

  • shars cat40 tool holder

    Pilot Contact

    Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity

  • shars cat40 tool holder

    Taper End Face

    Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity

Tech Specification

  • Taper Size

    CAT40

  • Bore Diameter

    3/8"

  • Projection Length

    4.72"

  • Bore Depth

    1.18"

  • TIR (at collet face)

    < 0.0001"

  • Max Balanced To

    G2.5 30,000 RPM

  • Coolant Type

    Non-Coolant Thru

  • Taper Nose Diameter (Min)

    0.4307"

  • Taper Nose Diameter (Max)

    2.0866"

Spotlight

  • Minimum Clearance



    In the mindset to minimize the wall thickness, the 0.4931" nose diameter extension nose provides better tool clearance in long reach application.

  • Pre-Balance Design

    Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification.  On the shoulder under the flange, a side is mill flat to compensate the weight of the metal chips lost from forming the spherical hole in the flange.  This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.

     

  • .0002" Runout at 4xD Length


    To achieve 3 micron or better internal bore runout, our internal bore are precision ground on Toyo CNC grinder from Japan. There is not cutting corner on this time consuming internal grinding process and the low runout would contribute to longer cutting tool life and better surface finished.

What’s Included

Reviews

Catalog