4" table utilizes low profile locks for added workspace
Gear ratio: 4" table is 72:1; 6-16" tables are 90:1
Flatness of clamping service-concave: .0006"
Concentricity of center bore: .0008
Parallelism of clamping surface to angle face: .0008"
Squareness of angle surface to clamping surface: .0004"
Squareness of clamping surface to center slot: .0008"
8" 3 jaw self
Semi-steel chuck body made from high quality cast iron
Three pinion design with each pinion ground and hardened to HRC 43
Two piece jaw design with a master jaw and a top reversible jaw in American Standard tongue and groove specification
Both side of jaw teeth and guides are ground and hardened to HRC 58-62
Each set of jaws are serialized in their own set
A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy
Before assembling the jaw to its designated chuck body, the jaw's finish machining are performed on a closed tolerance state of the art CNC machine from Japan
Scroll plate's thread flank are ground on both side to achieve a tighter contact with the master jaw
Each chuck has gone through rigorous accuracy and repeatability inspection with clamping and jamming multiple random testing rods or rings
Accuracy is maintained for the entire clamping range
8" Horizontal Verticle Rotary Table(202-2002-3)
Table diameter: 8"
Horizontal O/A Height: 4.13"
Center height vertical position: 5.31"
Overall height in vertical position: 10.43''
Overall width (not including handle) in vertical position: 8.66''
Mounting table bolt width: 0.63''
T-slot width: 0.55''
No. of slots: 3
Center taper: Morse Taper 3
Without coolant pathway on rotary table base to catch the coolant
8" 3 jaw self-centering lathe chuck(202-6189)
Diameter: 8"
Mounting: Front Mount & Plain back
Center hole: 2.56"
Thickness: 2.95"
Bolt Circle Diameter: 7.087"
Runout: 0.0039"
What’s Included
8" Horizontal Verticle Rotary Table(202-2002-3)
8" 3 jaw self-centering lathe chuck(202-6189)
1 center align pin(202-2044)
1 set of reversible jaws for inside and outside
6 piece of mounting screws for the lathe chuck back plate (3 screws for front mounting and 3 screws for back mounting)