4" 400DS CNC Double Station Milling Machine Vise 0.0002"

SKU 202-0998

4" 400DS CNC Double Station Milling Machine Vise 0.0002"

Availability In stock

Shipping Ups Ground

$720.00
SKU 202-0998
Vise Category Milling Machine Vises
Brand Shars Tool
Vise Application CNC machine, manual machine
jaw opening 3.54
Jaw Width 4
Jaw Depth 1.49
overall length 15.94
Bed Height +/-0.0005" 2.5
With Swivel Base no
Jaw Plate Thread Size 3/8"-16
Jaw Plate Threads Spacing (inch) 2.5
Clamping Force (Lbs) 4400
Full Details

Product Spotlight

400DS Advantage 

  • Unique leadscrew design provides ability to clamp either same sized parts or dissimilar sized parts, even if the difference between the two parts is as big as 3.54", while allowing 6 different jaw clamping configurations
  • Unlike other less expensive import vises, 400DS offers advanced improvements to prevent jaw lifting by using eccentric pin locking mechanism no matter if the vise is lay flat in normal fashion, on the side, or vertically upright in a tower vise configuration.
  • Unique clamping force equalization mechanism allows same amount of clamping force applied evenly to different sized part when jaws starts tightening
  • By removing the middle fixed jaw, 400DS can be converted into a 9.25" capacity single station vise with the included converstion hardware kits.  In this single station configuration, unlike other competitor's vise, 600DS's rear jaw close in towards the operator and able to close completely.  Another hidden advantage with front jaw being fixed is that it allows CNC machine operator to program in Y axis positive direction   
  • Vise body made from 80,000 PSI stress relieved ductile cast iron
  • Vise bed is hardened to 45 HRc and Jaw Plates flame hardened to 54 HRc
  • Precision ground flat sides allow the vise to be mounted on each side or in high density mounting system


 
  • Chip guard pre-installed on each vise
  • Recessed hex leadscrew
  • Up to 6000 Lbs of clamping force
  • Bed height matched to 2.50" +/- 0.0005" (matched bed height on pair orders)
  • Clamping repeatability within +/- 0.0002"
  • Bed height tolerance of +/- 0.0005"
  • Vises' bed parallel to base within 0.0005"
  • Fixed Jaw perpendicular to bed within 0.0005"
  • Fixed jaw parallel to vise's keyway within +/- 0.0005"
  • Vise Jaw Plate thread and spacing is compatible with other American made vise on the market
  • Footprint and distance from the keyway to stationary jaws meet the industry standard
  • Life Time Limited Warranty

 

Lifetime Limited Warranty 

Shars Tool warrants that this 600DS vise will be free from defects in material and/or workmanship for the life of the product. The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear. Failure to properly maintain and/or operate this product under normal conditions, or the use of this vise with third party components will void this warranty. This warranty does not cover normal wear items (Example: O-rings, leadscrew, vise jaw, etc.) and any product or part that has been, abused, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.  Shars Tool is not responsible for damage cost resulting from failure or defect of this vise.  Shars Tool will correct any defects by repair or replacement at Shars Tool's choice provided that such an item is returned to Shars Tool’s place of business with transportation, shipping and postal charges prepaid.

Parts List

400DS-4 400DS-22-23-24-25
Main Lead Screw Side Cover, 4pcs
440DS-33 400DS-sj4
4 pc Jaw Set 4" Aluminum Movable Jaw (2) + Fixed Jaw

What's Included

  • Polish Handle and extension leadscrew socket
  • 2 pc of 18mm T-slot Keys
  • Four toe clamps with T-nuts for 18mm T-slots
  • Conversion Kits (Jaw fixing plate & screws)
  • Built-in chip guard
  • Inspection report

Reviews