Explore New Videos on Instagram #sharstoolco

1.4-2.0" Electronic Bore Gage with 0.5" Aventor DPS Indicator .00005''

SKU
303-4758
$289.95
In stock

Shipping UPS Ground

Resources

Details

More Information
Mfg SKU #303-4758
Bore Gage CategoryElectronic
BrandAventor
Minimum Measuring Range1.4", 35mm
Maximum Measuring Range2", 50mm
Bore Depth5.4
Contact Points2
resolution0.00005"/0.001mm
Accuracy±0.00027"/0.007mm
Repeatability0.000078"/0.002mm
No. of Anvil6

Design

Craftmanship

  • aventor digital indicator

    330 Degree Rotation

    Digital Face can be rotated 330 degree to assist in easy reading position

  • aventor digital indicator

    Stem Bushing

    Brass bushing within the stem to assist in free spindle movement

  • aventor digital indicator

    Ceramic Ball Tip

    Measuring contact ball tip are made of ceramic ball for durability and non-marring

Tech Specification

  • Range

    1.4-2.0" / 35-50mm

  • Resolution

    0.00005" / 0.001mm

  • Accuracy (Tolerance Range)

    0.00027" / 0.007mm

  • Repeatability

    0.000078" / 0.002mm

  • Probe Depth

    5.4"

  • Number of Anvils

    6

  • LCD Display Size

    40.4mm x 17.4mm (10.2mm Digit Height)

  • Battery

    3V CR2032 Lithium battery

  • Warranty

    1 year limited

Spotlight

  • The minimum value holding function give easy detection of the bore diameter while the bore gage is rocked inside the bore.  
  • Relative Measurement Mode: Drop the bore gage into a master ring gage and use the MIN key to find the minimum bore value.  After a minimum value is recorded and stored, bore gage can be retrieved out of the master ring gage, press and hold the CAL key for 3 seconds to set the stored minimum value as the reference point and the digital indicator would display 0.0000".  Now the bore gage can be used as comparative measurement gage to check the variance of a workpiece's bore against the master value. 

Relative Measurement Steps

Step 1: Find Min Step 2: Set CAL Step 3: Reference Point Set
  • Absolute Measurement Mode: Before dropping the bore gage into a master ring gage, use the Preset key to set the indicator to be the master ring gage's bore diameter.  Next drop the bore gage into the master ring gage and use MIN key to find the minimum value. After a minimum value is recorded and stored, bore gage can be retrieved out of the master ring gage, press and hold the CAL key for 3 seconds to set the stored minimum value as the ring master's bore diameter and the digital indicator would display the preset value.  Now the bore gage can be used to measure the absolute bore diameter of a workpiece.
  • Origin point can be set and retained to display the spindle's absolute true coordinate from the origin point for the entire battery life cycle.  Once the the origin point is set, there are no needs to repeatedly perform a zero setting operation at power-on which allows quick and easy ready-to-use operation when taking multiple point measurement.

  • Advanced encoder design eliminates overspeed travel errors 
  • Spindle's up/down movement can be easily toggled by setting the positive/negative count (+/-) key
  • Preset function key allows indicator to preset to any choosen coordinates by pressing the Preset key to enter into the Preset mode and press IN/MM key to adjust the value on each decimal places

 

  • 1 SPC output port to allow data to transfer to desktop in excel or other text file format (USB cable sold separately)

  • Each indicator is labeled with technical specification and serial # and battery specification

What’s Included

Reviews

Catalog