DG1326 1/2" - 1-3/16" Precision Drill Sharpener
SKU
101-1039
$1,149.95
Out of Stock
Shipping Freight
Details
| Mfg SKU # | 101-1039 |
|---|---|
| Brand | Shars Tool |
| drill size range | 1/2 - 1-3/16 |
| Drill Point Angle Range | 95-135 |
| Motor | 3/8 HP, 1 Phase, 110 V, 60 Hz |
| Horse Power | 3/8HP |
| Power | 250 W |
| Maximum RPM | 4400 |
Design
Spotlight
| Motor: | 3/8 HP, 1 Phase 110 Volt | Drill capacity: | 1/2" - 1-3/16" |
| Spindle Speed: | 4400 RPM | Drill Point Angle: | 90° - 135° |
| Power: | 250 Watts | ||
| Net Weight: | 74 Lbs |
| Application |  |
 |
- Extra capacity to sharpen HSS & cobalt drill from 1/2 to 1-3/16"
- Capable of sharpening drill bit from 95° to 135° point angle to either a standard or split point
- Capable of creating and repairing split point from standard point
- Easy to operate: plug in the cutting tool holder into the designated slot and let the grinder perform the pre-designed grinding operation
- Fool proof design, portable, simple operating and high precision grinding
- Use ER40 collet
- Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit, which allow to produce various drill bit to accommodate different workpiece material
- Using the inch size vernier dial to set up the cutting tool in appropriate length for drill bit or diameter for end mill
- Grinding range of 1/2 - 1-3/16" for drill bit
- Capable of sharpening the front rake, front tip angle and clearance angle of drill bits
- Drill tightened design with bearing device
- Capable of find adjustment on center point
- CBN wheel service lifetime on average of 3000 grinding operation
| ER40 Collet 14 pcs Set | Cutting Tool Holder | CBN Wheel |
|---|---|---|
 |
 |
 |
What’s Included
- 1 pc of ER40 collet tool holder
- 14 pcs of ER40 in true English size: 1/2", 9/16", 5/8", 11/16", 3/4", 25/32", 13/16", 7/8", 15/16", 31/32", 1", 1-1/16", 1-1/8", 1-3/16"
- 1 pc of 230 Grit CBN wheel for HSS & Cobalt drill
| CBN Wheel Size | Grit Size | Application |
| 125mm D x 20mm T x 18.93mm Arbor hole | 230 grit | HSS & Cobalt drill bit |
